apex legends sensitivity

Apex Legends Sensitivity Guide: Classic vs ALC Settings Explained

If you have ever searched for the best apex legends sensitivity, you have probably run into two words that confuse everyone: Classic and ALC. Some guides tell you to pick Classic. Others tell you to tune ALC. A few talk about both like they are choices on the same menu. Here is the truth that clears it all up: if you play on mouse and keyboard, neither Classic nor ALC is your menu. Both live in the controller settings. An EA community manager has confirmed this directly: ALC is part of the controller settings, so it does not apply to your mouse options.

So what should a mouse player actually tune? This guide walks through the real mouse settings in Apex Legends, explains what Classic and ALC mean so you never wonder again, shows what DPI and sensitivity numbers good players use, and gives you a simple method to find your own perfect setup. No copied pro configs presented as magic. No invented numbers. Just the settings, what they do, and how to tune them.

If you are switching from another shooter and want your old feel on day one, the Apex Legends sensitivity converter translates your speed for you. This guide covers the thinking behind the numbers.

The Big Confusion First: ALC Is for Controllers, Not Your Mouse

ALC stands for Advanced Look Controls. It lives under Settings, then Controller, and it only changes how a controller stick turns your view. It has sliders like deadzone, outer threshold, yaw speed, pitch speed, turn extra and response curve. Every one of those describes stick behavior. None of them touches your mouse.

So where does Classic fit in? Classic is one of the response curve choices inside the controller settings, next to Linear and Fine Aim. The response curve decides how your stick input turns into camera movement. Classic is the old familiar curve, and a lot of controller pros use it. When people say Classic vs ALC, they are talking about two ways to set up a controller: pick the Classic preset curve, or open full ALC and tune every slider by hand.

If you play on mouse and keyboard, you will never see the ALC menu at all. Your tuning happens in a different tab: Settings, then Mouse/Keyboard. That is the whole confusion, cleared up in one paragraph. Mouse players do not choose between Classic and ALC. They set up their mouse sliders, which is what the rest of this guide covers.

Apex Legends Sensitivity Settings: Where They Live

Open Settings, then Mouse/Keyboard, and you will find everything that matters for your aim. The main sliders are Mouse Sensitivity, ADS Mouse Sensitivity, Per Optic ADS Sensitivity, Mouse Acceleration and Mouse Invert. A couple of extra options sit nearby, like lighting effects for mice that support them, but they do not change your aim.

Before you touch anything, write down your current numbers. Take a phone photo of the settings screen or jot the values in a note. A game update, a new PC or a curious friend can wipe your setup, and getting back to your real aim should take minutes, not weeks. This habit alone saves more players than any single slider tip.

One more thing to set before tuning: your field of view. Apex lets you raise FOV up to 110, and almost every pro plays at 110. The default is 90, which feels zoomed in and slow. A wider FOV shows more of the fight around you, which matters in a battle royale where threats come from every side. Set FOV to 110 first, because changing it later changes how fast your sensitivity feels.

Every Mouse Slider Explained in Plain Words

Mouse Sensitivity is your main slider. It controls how fast your view turns when you move the mouse without aiming. The community settings wiki lists the slider range as 0.2 to 20, which is huge, but almost every good player lands in a small part of it. At 800 DPI, most pros use something between 1.0 and 2.0. More on exact numbers later.

ADS Mouse Sensitivity is a multiplier for when you aim down sights. At 1.0, aiming feels exactly like your hipfire speed. Lower values slow your aim down for steadier tracking. Most guides and pro setups keep this at 1.0, because one consistent speed is easier for your hand to learn than two different ones.

Per Optic ADS Sensitivity lets you set a different ADS multiplier for each scope level, from 1x up to 10x. It sounds useful, but most good players leave it off or set every optic to 1.0. The reason is muscle memory. Your hand learns one aiming speed. Splitting it across six different speeds makes every scope feel like a different game. Keep it simple until you have a real reason to change one optic.

Mouse Acceleration is a toggle, and you want it off. With acceleration on, the same hand movement turns your view a different amount depending on how fast you move the mouse. That kills consistency. Flicks become guesswork. Turn it off and your hand learns a fixed relationship between movement and turning, which is the whole foundation of good aim.

Mouse Invert flips your up and down look direction. Almost nobody inverts on mouse. Leave it at the default unless you grew up on inverted controls and your brain is wired that way.

What ALC Actually Does, Briefly, for the Curious

Even though ALC is not your menu, it helps to know what it is, so controller talk in streams and videos stops confusing you. ALC gives controller players deep control over stick behavior. Deadzone sets how far you must push the stick before the game reacts. Outer threshold sets a dead zone at the stick edge. Yaw speed and pitch speed set horizontal and vertical turn speed. Turn extra adds bonus speed when the stick is fully held. Ramp up time and turn delay control how quickly that bonus kicks in. Response curve picks the overall shape: Linear, Classic or Fine Aim.

Controller pros spend hours tuning these because stick aim needs aim assist and careful curves to compete. Mouse players skip all of it. Your mouse already gives you the precise input that ALC is trying to imitate. So when a video says ALC settings for Apex, check whether the player is on controller. If you are on mouse, close the video and come back to your Mouse/Keyboard tab.

Classic vs ALC: The Honest Comparison

Here is the comparison in one clean picture. Classic is a preset response curve for controller players. It is simple, familiar and used by many controller pros. ALC is the full manual tuning kit for controller players. It takes longer to set up, but it lets you shape every part of stick behavior. Mouse and keyboard players use neither. They tune the Mouse/Keyboard sliders instead.

So the real choice was never Classic vs ALC for you. The real choice is: do you understand your mouse sliders well enough to tune them on purpose? After this guide, you will. And the next time someone in chat argues about Classic vs ALC, you will know they are talking about controllers.

DPI, Sensitivity and eDPI: The Numbers That Matter

Your real aiming speed comes from two numbers multiplied together: your mouse DPI and your in game sensitivity. Players combine them into one number called eDPI, which is just DPI times sensitivity. So 800 DPI with 1.5 sens gives 1200 eDPI. eDPI lets you compare settings fairly even when two players use different DPI.

What eDPI do good Apex players use? Verified aggregates put the pro average around 1050 to 1100 eDPI, with most pros sitting somewhere between 600 and 1600. That is higher than CS2 or Valorant pros, and it makes sense. Apex is a battle royale with fast movement, third party fights and long tracking duels. You need enough speed to turn on someone behind you and enough control to track a strafing target with an R99.

Another useful number is cm per 360, which is how many centimeters your mouse must travel to spin your view all the way around. Apex uses the same turning rate as CS2, a yaw value of 0.022, so the math is friendly. The formula is 2.54 times 360 divided by sens times 0.022 times DPI. You do not need to memorize it. Our cm per 360 guide walks through it with examples. As a quick reference at 800 DPI: sens 1.3 is about 40 cm per 360, sens 1.48 is about 35 cm, sens 1.73 is about 30 cm and sens 2.08 is about 25 cm. Most pros land in the 25 to 40 cm band.

If your eDPI sits far above 1600, your aim probably feels shaky in real fights even if it feels fun in the Firing Range. If it sits far below 600, turning around will feel like hard work and you will run out of mousepad. Start inside the sane band and tune from there. You can check your own eDPI in seconds with the free tools on the homepage.

What DPI Should You Use for Apex Legends?

Pick 800 DPI and lock it in. It is the most common DPI among Apex pros, with 400 DPI as the second most used. There is nothing magical about 800. It is a clean native step for most gaming sensors, it keeps your eDPI math simple, and it matches what most guides and pro lists use, so comparing settings gets easier.

The DPI number itself matters less than the rule: pick one and never change it. Every sensitivity slider in the game assumes a fixed DPI. If you keep nudging DPI up and down, you are secretly changing your real speed every time, and your hand can never settle.

Two more hardware basics. Set your mouse polling rate to 1000Hz, which is the standard recommendation and what pro setups list. And turn off Enhance pointer precision in Windows mouse settings, keeping the pointer speed at the default middle notch. That setting is Windows mouse acceleration, and it has no place in a clean aiming setup. In game Mouse Acceleration stays off too, as covered above.

Per Optic Settings: Keep It Simple Like the Pros

Scopes in Apex range from 1x all the way to 10x, and the game lets you tune each one. The common pro practice is beautifully boring: ADS multiplier at 1.0 and Per Optic either off or set to 1.0 across every optic. One speed for everything. Your hand learns it once and trusts it everywhere, from a 1x holo to a 6x sniper scope.

If you ever feel a real need to tune one optic, do it for a reason you can name. For example, some players run their long range scopes slightly slower for steadier tracking at distance. That is fine, but change one optic by a small step, test it for days, and keep the rest at 1.0. What you must avoid is setting six different values on day one because a video told you to. That is how you end up with aim that feels different every time you pick up a new scope.

Real Pro Settings: Learn From Them, Do Not Copy Them

Here are real settings from a 2026 pro settings table, given as a map of sane values. Verhulst plays 800 DPI with 1.8 sens, which is 1440 eDPI. Reps plays 800 DPI with 1.4 sens, which is 1120 eDPI. Albralelie plays 800 DPI with 1.7 sens, which is 1360 eDPI. Zer0 plays 800 DPI with 1.4 sens, which is 1120 eDPI. iiTzTimmy plays 800 DPI with 1.2 sens, which is 960 eDPI. Faide plays 800 DPI with 1.6 sens, which is 1280 eDPI.

See the shape? All 800 DPI. All between 1.2 and 1.8 sens. All between 960 and 1440 eDPI. Nobody at wild extremes. The lesson is the shape, not the exact numbers. Their hands, grips, mousepad sizes and years of practice are not yours.

One caution about famous names. You will see ImperialHal’s old mouse settings quoted in many places, usually 800 DPI with 1.1 sens from older lists. He now plays on controller, so those old numbers are history, not a recommendation. Pro settings also change over time, which is why the aggregate range matters more than any single player. Start near the pro band, then find your own spot with the method below.

Find Your Perfect Sensitivity in About Thirty Minutes

Forget random guessing. This method takes about half an hour and gives you a setting you can trust.

Start with a clean base: 800 DPI, 1.5 sens, ADS multiplier 1.0, Per Optic off, Mouse Acceleration off, FOV 110. That is 1200 eDPI, right in the sane band. Write it down along with every other value.

Head to the Firing Range and run the turn test. Stand still, put your mouse at the left edge of your pad, and swipe smoothly to the right edge in one motion. Your view should turn about 180 degrees, so you face exactly behind you. If you spin way past that, lower sens by 0.1. If you turn way less, raise it by 0.1. Repeat until one full swipe gives you that half turn. This one test fixes most sensitivity problems by itself.

Next, test tracking. Turn on the moving target dummies and follow one with your crosshair using an R99 or Volt, without firing at first. Your crosshair should stay glued to the dummy. If it keeps sliding ahead of the target, your sens is too high. If you lag behind and cannot catch up, it is too low. Adjust in 0.1 steps until tracking feels glued.

Then test recoil control. Spray a full magazine into a wall from mid range with a Spitfire or Flatline, pulling down to fight the climb. If the pattern sprays everywhere no matter how you pull, your sens is probably too high for your current control. If you run out of pad pulling down, it is too low. Small steps again.

Finally, play at least ten real matches without touching anything. Your hand needs time to learn. Judge the setting only after those matches. If something still feels off, change one value by a small step and repeat. One change at a time. That is the whole secret, and it is the part most players skip.

The thirty minute method

  • Start at 800 DPI and 1.5 sens, ADS 1.0, FOV 110
  • Do the turn test until a full swipe is a 180
  • Track moving dummies until your crosshair stays glued
  • Spray a magazine and watch for runaway or run out of pad
  • Adjust in 0.1 steps and retest
  • Play ten matches before you judge

7 Mistakes That Hold Apex Players Back

Seven mistakes to avoid

  • Copying a pro setting and never testing it
  • Changing DPI every week
  • Tuning per optic on day one
  • Leaving Mouse Acceleration on
  • Judging a new sens after one match
  • Changing three things at once
  • Never writing your numbers down

Your Settings Checklist for Today

Quick checklist

  • Start at 800 DPI and 1.5 sens
  • Set ADS to 1.0 and leave per optic alone
  • Turn Mouse Acceleration off
  • Set FOV to 110
  • Do the turn test in the Firing Range
  • Play ten matches before judging
  • Write down the numbers that work

Conclusion

Apex Legends sensitivity looks confusing because the internet mixes up controller talk and mouse talk. Now you know the truth. ALC and Classic belong to controllers. Your game is the Mouse/Keyboard tab: one main sens, one ADS multiplier, acceleration off, a sane DPI, and per optic settings left alone until you earn a reason to touch them.

Do the thirty minute method, write your numbers down, and give your hand ten matches to learn. That is what a good sensitivity really is. Not a magic number from a pro, but a setup your hand can trust in every fight, from a hot drop to the final ring.

Frequently Asked Questions

They are not rivals for mouse players. Both are controller settings. Classic is a preset response curve, and ALC is the manual tuning kit for the same controller menu. If you play on mouse and keyboard, you use neither. Your tuning happens in Settings, then Mouse/Keyboard.

Most land in the 1000 to 1600 eDPI band, often around 1200 to 1400. At 800 DPI that means an in-game sensitivity between 1.0 and 2.0. The pattern matters more than any single number, so start in the band and tune with the 10-minute method.

Not at first. Keep every optic at 1.0 until your base sensitivity feels automatic. Only then, change one optic at a time by 0.1 to solve a specific problem, like steadier long-range tracking.

They multiply together into eDPI, which is the number that sets your real speed. Pick 400 or 800 DPI and stop changing it, then tune the in-game slider. Same eDPI means the same speed, whatever the split. You can measure your exact number with the cm per 360 guide.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *